-
I've done some investigations on what good mod-tap behavior could be.
This is a complex matter, as [other firmwares like QMK often have many configuration options for the behavior of the mod-taps]…
-
One of the consequences of #21 is that existing keymaps - both user and default - will subsequently contain deprecated key names. Although we're planning to gradually phase them out over time, it wou…
-
I used the ZMK firmware ext_ VCC does not have the correct output， When I'm not connected to RGB, the voltage is 3.3V. But as soon as I connect the RGB voltage to 2. + V。
is power pin problem？
-
**Describe the bug**
https://github.com/zephyrproject-rtos/zephyr/blob/0a0cb52fb2290b825f4e6b0d8d1f7bfad358cf01/dts/binding-template.yaml#L157-L160 indicates that in a value of type phandle-array, …
-
Since we introduced BLE profiles, we've had many user experience problems w/ their nice nano getting "stuck" in the bootloader, and after reflashing ZMK, the next power cycle it goes directly to bootl…
-
It appears there have been several reports of RGB strips and LEDs flickering in the current configurations. I am using the following strip and experienced this issue on my QAZ
`https://www.aliexpre…
-
**Describe the bug**
TPM PCR0 differs from reconstruction, uploading based on instructions from https://github.com/fwupd/fwupd/wiki/TPM-PCR0-differs-from-reconstruction. I apologize for the long outp…
-
**Describe the bug**
running fwupdtool update yields me the following message. This is new behavior to me:
```
05:19:26:0008 FuPluginTpmEventlog TPM PCR0 differs from reconstruction, please se…
-
Model: Dell Precision 7730
As requested, here's the output from the log:
[fwupdtpmevlog.log](https://github.com/fwupd/fwupd/files/4552798/fwupdtpmevlog.log)
```
PCR: BIOS (…
-
**Describe the bug**
I recently updated the system firmware from 1.6.0 to 1.7.0 on my Dell XPS 15 7590 running Arch Linux.
I'm not sure if this error was shown before upgrading to 1.7.0.
**fwupd …
tyilo updated
3 years ago