-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I'm trying to build the V1 Lowrider 3 firmware in a configuration with X_DUAL_ENDSTOPS enable…
-
#define INVERT_E0_DIR set to true
As there is no way to plug in the extruder backwards this is a problem.
Not sure what the protocol is for updating configs on here and I'm hesitant to do …
-
So first, I am running a build based on the latest version of bugfix-2.1.x_JYERSUI-Enhanced but with the JyersUI selected in configuration.h. But the instructions for using this code base is to use th…
-
Define Stepper API, public/private scope, interaction possibilities
-
I want to add the missing German translations for i8n as described in https://docs.wokwi.com/guides/translating.
```
{
"userMenu.signIn": "Anmelden",
"userMenu.signUp": "Registrieren",
"u…
maehw updated
2 years ago
-
The arduino code is actually made for A4988 drivers & 4 microswitch endstops
It should use TMC2130 stallguard function to detect endstops & detect ejection fails to retry
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I'm slicing this part in vase mode in Cura, with [Arc Welder](https://github.com/Former…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
I did not make any changes to the codes. Very first time I compiled it was able to produce all of th…
-
Ver el mejor voltaje aplicable para el A4988 a través de pruebas.
-
I am wondering why you have the DRV8825's Fault pin connected to 5v. From what I can see from other schematics that use this driver, that pin is never connected to the VCC of the microcontroller. Th…