-
In June @Volk3rJ noticed that his rain gauge returned a -9999 during a very intense rain event:
> Just a curious question. We seemingly had a pretty intense short rainfall event yestarday. Our LAF …
-
Hi, just across this repo when it was mentioned yesterday in this thread: https://community.home-assistant.io/t/davis-weatherlink-integration/134737/25. It looks very good, and I'd like to try it out,…
-
@stephenholleran Given that the geovane is gaining more acceptance in the wind industry, we would need to define what is the sensor_type_id for it. We could put under other but I think we should give …
-
-
- [x] Lock the uController to be used (ESP32/ESP8266)
- [x] Lock the technologies of the sensors
- [x] Temperature
- [x] Humidity
- [x] Sound
- [x] Wind-speed
-
When windSpeed is 0, weewx sends a null winddir value to wunderground. According to wunderground support, this causes the "Wind" display in "PWS Current Conditions" to show "Unavailable." This is misl…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable boxes before…
-
I've installed your driver and it works a treat with my WLL and Anemometer transmitter.
My problem is, the packets are being logged. As this happens every 2.5 seconds or so, it's a huge amount being …
-
Currently when a wind speed report of 0 km/h is generated (i.e. no wind) the wind direction is, by design, set to 0 degrees (i.e. North). During periods of light winds when the wind stops for a shor…
-
### General
This issue is a proposal to add another building type "conservatory" to the list of answers for "What kind of building is this?". Conservatories are common in residential areas, e.g. …