-
### Bug Description
I can't compile the last bugfix version because of this error.
"LCD_SERIAL_PORT cannot be the same as SERIAL_PORT_2."
I have a creality ender 3v2 and I used the configurat…
-
Hi.
look for a function that allows auto level to start only after homeing has been carried out.
-
Newest plugin gives errors and does not install.
-
Description
1) Live Adjustment causing axes to stutter back and forth when commanded to only flow in a single direction (AKA sending Z up so I can clean my bed.) Does not have the same issue when l…
-
I have included the Ender 3V2 in the config and the corresponding PLA and PETG from "Das Filament" in my [fork](https://github.com/etofi/PrusaSlicer).
etofi updated
3 years ago
-
Hey there,
BTT SKR Mini 3V2 on a Ender 5 Plus with Marlin Tag 2.0.7.2
I wanted to enable automatic Z leveling with marlin, but I cant address the second z axis.
It looks to me that the second …
-
### Description
Hi,
When I want to check or uncheck "Filament sensor" or "Power-loss recovery", I cant see the checkbox like I'm seeing in JSTECH video.
When I long press in "Filament sensor" f…
-
### Bug Description
Despite the BLT v3.1 probing and reflecting (i.e. using M503) a grid, there are no z commands during initial layer print as I would expect to adjust for the bed level and th…
-
### Application Version
Arachne_engine_beta
### Platform
Windows 10
### Printer
Creality Cr-10s
### Reproduction steps
Load model, rotate, scale 2000%, slice with setting profile
### Actual r…
-
Are the configuration files and build settings you use to create the pre-compiled firmware files you publish _(For example, [this release for the Ender 3 v2](https://github.com/smith3d/Marlin/releases…