-
**Describe the bug**
In console there is printed the following uncaught exception. I didn't notice yet that something else is broken by that.
**To Reproduce**
Steps to reproduce the behavior:
…
-
### Information on Hw/Sw pattern
Arduino core MKR WiFi 1010
WIFININA ver. 1.4.7
MDNS_Generic ver 1.1.0
Arduino ver 1.8.15
### Describe the bug
The hw runs a web server with mDns initialised w…
-
Problem: Compiled sketches failed to up load to board.
Version: Linux Mint 20.1 (probably all versions of linux)
Arduino IDE: 1.8.13
Core: Arduino Mbed OS Nano Boards v2.1.0
My Solution instal…
-
I'm getting some quite good results with my Arduino BLE setup (I'm using the more expensive, PARA BLE module with onboard antenna, which I've soldered into my TX16S), but even after playing around wit…
-
With this test program:
````
void setup() {
Serial.begin(9600);
}
void loop (void) {
if (Serial.available()) Serial.print((char)Serial.read());
}
````
if you repeatedly paste this 62-ch…
-
### CircuitPython version
```python
Adafruit CircuitPython 7.0.0 on 2021-09-20; Raspberry Pi Pico with rp2040
Board ID:raspberry_pi_pico
boot.py output:
Write to Flash : False
Write to SD Card…
-
Therefore there is an error when compiling.
The authors of the RP2040 core try to justify the lack. It's just ridiculous!
-
Looking at this great core, I don't see an obvious way of putting the RP2040 in to SPI slave mode. Am I missing something or is this not yet implemented?
-
I am using the `Arduino Nano RP2040 Connect` board and I succesfully have it running with your example code (i.e. Examples-->WiFiManager_NINA_Lite-->RP2040_WiFiNINA)
In order to save battery, I cha…
-
Currently, PlatformIO only seems to support `cmsis-dap and raspberry-swd` debug options. `jlink` and `stlink` do not appear to be supported.
`SEGGER` have updated their J-Link probe firmware to sup…