-
The remote is now working while plugged in but need help with yaml and gpio mapping? Do…
-
While waiting for some MOSFETs to be shipped, I set this up on a breadboard with some BJTs and installed [esphome-ratgdo](https://github.com/ratgdo/esphome-ratgdo) on a leftover [ESP8266](https://www.…
-
It's possible that this is not the issue....
When I went to zip tie the ratgdo in its final mounting place after testing it for a week, I was not careful enough and ended up breaking the USB port o…
-
Basically I have some WEMOS LOLIN S2 Mini boards and I would like to use them with the ratgdo shield. I'm willing to try and get it working myself but I don't really understand how to compile this pro…
-
I don't see the connect to the OBST pins in the PCG view that are in the schematic.
Am I missing something?
thanks
-
Got this working with my garage door opener, works great! I also have a liftmaster swing gate opener (LA412, manual here: https://support.partner.liftmaster.com/s/article/LA412UL-Installation-Manual) …
-
I don't know much about those components. I trust your judgment to change one of the 2N7000 to a rfp30n06le. My question is: could I change both to rfp30n06le? In my case, I don't have either compo…
-
Anyone able to help me with knowing which pins to use and what to plug into for this to work with this board?
Board link: [AITRIP 3PCS Type-C USB ESP32...](https://www.amazon.com/dp/B0B19KRPRC?ref=pp…
-
I'd like to update a v2.0 shield to v2.5. It is as simple as removing the R3 resistor and adding a 10k resistor between d1 and the "output" side of R3?
THANKS!
-
I use the door status output to turn on parking lasers that help with parking the cars in the right spot. I often enter the garage before the door is even fully up so the laser turns on a bit too late…