-
Add warning when system temperature, voltage or averaged CPU exceeds limits.
This would allow users to diagnose some stability issues, especially when running video streaming
-
Today, I received additional CM4 and standard IO board. This is for PTP client to confirm if grandmaster does its role correctly or not from the standpoint of PTP client, hence there's no GNSS relate…
-
Hello Scott,
Thanks for releasing this btw!!!
I finally got around to trying to setup an skr1.3 with a rpi 4 and while I can get it out of e-stop it ultimately is unstable. A few notes:
1. r…
-
I see that the current IO configuration and hardware interface ID information of NG are solidified inside the driver using macro definitions, is it possible to use the device tree to obtain this infor…
-
3a+(hdmi works by default) vs 4b(hdmi doesn't work by default)
Docs used: https://www.raspberrypi.org/documentation/configuration/config-txt/video.md
Image used: 2019-07-10-raspbian-buster-lite.im…
-
VC4 stopped working with upstream kernels after bd88f66f8952d34e4e0613a85c7a6d3da49e13e2. The VC4 modules load but VC4 does not work. This issue is the same with all upstream kernels I tried:
```
…
-
Hello!
I am currently building the BMO. But unfortunatelly i have problem with display. Am I supposed to do something to see retropie start-up on the screen? Any configuration? Currently my display o…
-
Hello,
I was excperiencing some freezing / hanging behaviour with some tm1637 7-segment displays and this library on a Raspberry Pi Pico board.
I was able to fix it modifiyng your original library a…
-
**Describe your photobooth**
This is my second Photo Booth, the first one was even more a prototype for my dad's birthday. However, I have received many inquiries there if I would lend my Photo Booth…
-
### Describe the bug
Getting: “failed to load overlay i2s-mmap”
**To Reproduce**
Clean install the OS on RPIZ2W
Clone and install.sh
the install script will ask you to reboot to upgrade Kernel…