-
Hie, Im using esp32 with arduino IDE for receiving sensor values from nrf24lo1, when Im trying to upload the code it just displays error for esp32 but the code work with arduino uno. code.zip files co…
-
Hello everyone.
I am developing an application that uses both the SPI and I2C. Also I am using both the cores. but I am facing an error no matter what I do. I tried to use one core also without any f…
-
Hardware : [ESP32 Lora board](https://easyeda.com/GabeH/esp32-lora-aprs) design by myself ([BV5DJ](https://www.qrz.com/db/bv5dj))
Lora : E22 SX1268
config: server mode (APRS-IS gate mode)
ERR:
…
-
I have SX1278 LoRa module and RAK831 LoRa Wan Gateway. (433 Mhz). Will this library work with 433Mhz hardware? I can't see 433 Mhz frequency to select in config file from where you can select your reg…
-
Hi, pls I'm trying to TX D-Star DV messages from ttgo t-beam (esp32, GPS, sx1278 433MHz), however, I've got to the point when I'm unable to RX&TX GMSK packets between two SX1278 on my desk (not speak…
-
SX1261: PRAM version: SX1268 V2F 2F06
SX1261: PRAM version: SX1268 V2F 2F06
ERROR: SX1261 PRAM version mismatch (got:2F06 expected:2D06)
ERROR: failed to patch sx1261 radio for LBT/Spectral Scan
-
I Followed the guide and successfully uploaded the problem but the respod in the serial monitor of my arduino is like this:
Starting
FAILURE
C:\Users\Paul Rodolf Castor\Documents\Arduino\libraries…
-
IOT domain is dominated by Zigbee Lora. Currently, there is no relevant library at.NET Core. Could you please add lora ZigBee related library?
Lora SX1278 and other chips!
thank you
-
-
Hi Honzo, do you think there is a way to implement a more robust AFC? My SX1278 board has offset 2.5kHz! When I transmit from ICOM radio, then I have to be within +/- 500Hz to be able to receive it (p…