-
![image](https://user-images.githubusercontent.com/3507067/88017674-5fb05500-cae3-11ea-8191-40d842cce6fd.png)
From: LilyGo_TBeam_V1.1.pdf
-
Hi,
on my 2 tbeam I've notice this uncorrect time counting.
As per the video the timing goes up and down and step from minutes to hours and back. In general after 4 minutes it step up to 74 or 93 ho…
-
README.md states:
> - When using LMIC debugging, output is automatically routed to the correct serial port.
> *No need to set the `LMIC_PRINTF_TO` parameter to `Serial` or `SerialUSB` manually.*
…
-
Hi, can we make a setup for an “open” board where we can use a random esp32 and LoRa module connected together?
-
Hello,
I'm trying to transmit data through the LoRa antenna between my TTGO T-BEAM V0.7 (emitter), to a Heltec Lora32 V2 (receiver). For this, I'm using the LoraSender example code from this repo, …
-
Hi,
Unfortunately, the station does not show sub-zero temperatures.
Here the issue is probably resolved, but now I don't have a board to check it out:
https://github.com/kizniche/ttgo-tbeam-sen…
-
Hello, I have 12 TBeam (T22_v1.1) , and 2 of them went on overheating the AXP. They can boot, then disapear from USB list. One used a 18650 battery, the second was'nt.
Is there a fuse or resistor pr…
-
Here is a error log :
```
[DEBUG] packageLoader.load_packages(): Loading BrushTemplate "BEE2_SIGNAGE_50S_ARROW"!
[DEBUG] packageLoader.load_packages(): Loading BrushTemplate "BEE_DOOR_COWL_CLEAN…
-
The upload interface is being used more often. Maybe it should no longer be experimental.
It crashes in the web server( esp32 https server ) in dealing with the incoming stream from the browser.
…
-
**Description**
After upgrading device firmware from v1.1.6 to v1.1.7 on a tbeam1.1-M8N-SX1262 ("Modle"), the standalone location broadcast feature appears to have stopped working. Downgrading to 1.1…