-
'Actual' temps are what cync2mqtt reports from lights when changed from Cync app. 'HASS' temps are what HASS tries to push to cync2mqtt
HASS ranges from 153 (coolest/~7000K) to 500 (warmest/~2000K)…
-
Hi victor,
strikes me that this hardware is so cheap in comparison to any form of 'iBeacon' that an iBeacon mode may be a useful addition.
I'm not sure what make something an 'iBeacon', but I'm gu…
-
Hi,
I'm having trouble using the touchscreen on RPi 4. I started the app using `flutter-pi -i "/dev/input/event5" -d "154,86" /test.app` .The app starts fine and works well with the mouse, but the t…
-
Hello,
After I flashed the LYWSD03MMC, the web flasher always reports "Detected custom Firmware".
I tried to use the other flasher (https://pvvx.github.io/ATC_MiThermometer/TelinkOTA.html) and re-f…
-
#### Problem
https://github.com/project-chip/connectedhomeip/runs/4735883752?check_suite_focus=true
In `./middleware/wireless/bluetooth/host/interface/ble_utils.h` inside k32w sdk line 77-79
```…
-
I know that previously the advertised temperature matched the sensor display temperature, but was changed to Celsius for compatibility with some HA software. Would it be possible to make the tempera…
-
I got 2 devices today with the date of 2021.8 on the back. But the HW is 1.6. I tried to flash them with the fw V3.2. Unfortunately I got the error "This file is no telink firmware .bin!". Then I trie…
-
Hi Victor,
thanks for all your work with this sensor.
I know you have enabled to send encrypted packages like the original firmware does. However these packets require 25 Bytes transmitted as adv…
-
Just curious, any plans to add Thread and/or Matter protocol support?
-
Now that I'm actually connecting, seems to be an error from the config being sent.
These bulbs don't support RGB, but it is listed as a color mode in the error. Regardless, they do not successfull…