-
How would you recommend driving a motor using the Maker Pi Pico base? I'm interested in controlling [this peristaltic pump](https://www.adafruit.com/product/3910). Or is there something other than the…
-
Hi,
I've been trying to get the program running using Lepton 3 with the new [release](https://www.flir.com/products/lepton-breakout-board-v2.0/) of the breakout board, but images I am getting are e…
-
Extract from the instruction:
Use the app-control
1. Connect your device (eg smartphone, tablet, laptop) to the WLAN of the Raspberry Pi.
Default WLAN SSID "openMHA-wifi"
Default password "ope…
-
__TL;dr: "Generic Usb Device" should automatically detect the attached USB sound devices and select the one that was plugged in last, and offer the detected USB sound devices in a drop-down menu rath…
-
On M4 feather Express, I get a REPL output of
```
code.py output:
Traceback (most recent call last):
File "code.py", line 34, in
ValueError: D11 in use
```
My Circuitpython Code is :
``…
-
To make programming easier, and to allow simple (initially) testing it would be useful to have a programming/testing rig.
This can use the [openfixture](https://tinylabs.io/openfixture/) setup with…
-
I've been trying for hours to get my LED matrix to work on my Raspberry Pi 4, without success. I had checked the pins 3 times, and following the wiring.md file. When I run one of the demo's, regardles…
-
When I try
scons ARDUINO_PORT=COM5 ARDUINO_BOARD=atmega328 ARDUINO_VER=1.0.1 ARDUINO_HOME=C:\Arduino upload
I get these messages;;;
fnCompressCore(["build\core.a"], ["build\core\WInterrupts.o", "buil…
-
Hello
Not an issue per se, but a request for help.
I'm a bit of a noob when it comes to electonics/arduinos etc.
I have the breakout board which I've soldered up and am in the process of build…
-
Since a few people(including me) have several problems with their LED stripes can anybody recommend any LED Stripe which is working without trouble ?
Perhaps we can update the hardware list in the …