-
With kiwix-serve from kiwix-tools_linux64-2018-03-15.tar.gz
```
$ kiwix-serve --port=8080 --verbose /var/www/download.kiwix.org/zim/stack_exchange/3dprinting.stackexchange.com_en_all_2018-03.zim
=…
-
Hello
I have problem with the surface of my printed object it is very rough because the printer goes to deep in the ABS. Now I hope everyone can help me with this problem.
Thanks in advance.
With bes…
-
### Version
1.2.9
### Operating system type + version
Windows 7 x64
### Behavior
NEW FEATURE:
let user insert it's Z-Axis bar pitch and thread starts count. When user select a layer height j…
-
The new improvements on the plugin are really good and quite less complicated!
Im just droping prefabs since I dont need aditional XBLA funcionality, just login, since its single user.
I implement…
-
The scaling by default does not seem to be correct with the cr1d profile. When I used the default setting my parts which should be 27mm across came out at 25.8mm. After some research and editing I hav…
-
## contexte
Debut Décembre je m'en viens à bxl pour que l'on discute ensemble entre futur collègues :)
## objectif
revoir ensemble le github, la gamification, le projet vulca
-edit-
Definir une …
-
I have problems with the use of Advance_L and round objekts, perhaps of the small segments.
I am using a CoreXY (Sparkcube) with Repetier Firmware 1.0.3, a direct drive extruder and an e3dv6-Hotend…
-
Please create gyroid infill that is the shape as graphene. This shape has been shown to be very strong as a 3D printed object and if used as an infill would presumably create very strong 3D prints
…
-
I think it would be nice to see a honeycomb infill option for the infill pattern. I just find honeycomb to be much stronger for some composite prints.
https://www.illustrativemathematics.org/conte…
-
There appears to be a problem with where you are positioning your external perimeter. I think this is caused by using your build_spacing throughout the slice. This results in the outside of the print …