-
Randomly the nic, setted in DHCP, reboot itself, I've monitored it also with Observium via snmp
I've this problem on 0.49.6 and 0.50.2.
That's the configuration on 0.49.6:
```
firewall.@redirect…
-
Software versions :
OpenWrt - OpenWrt Designated Driver r48808
LuCI - git-16.057.47821-06cf8b1
mwan3 - 2.0-2
mwan3-luci - 1.4-4
MWAN3 Troubleshooting output: [mwan3_troubleshooting.txt](https://git…
ghost updated
6 years ago
-
I use a 6in4 tunnel for my IPv6 support. Unfortunately, bmon just shows the entire IPv6 path as a single "connection". It would be nice if there was a way to get it to look at the wrapped IPv6 header …
-
hi
I have a vps (1vcpu and 512mo of RAM) at ionos
But my router said alwaus that my vpn not respond.
I have tested all version 0.53.3 and 0.54rc7
but there are not good config who work.
-
## Expected Behavior
My download dont up 50mbps...
I have two 100mbps download an one 4G link
## Steps to Reproduce the Problem
1.Speed test
## Specifications
- OpenMPTCProuter ve…
-
## The bug
I tried to install _libreswan_ from sources.
I compiled and installed using:
```
root@:~# make programs
root@:~# make install
```
Then I configured a new connection:
```
#
# /et…
-
On 18.06.0,
1. You got an IPv6 tunnel interface, say 6to4 or 6in4.
2. Create a ddns entry, choose "IPv6 address".
3. And choose "IP address source" to be "network", along with "network" to be you…
-
Hello,
The MPTCP router is unable to ping my gateway (ADSL and 4G routers). I'm also unable to ping my laptop or my gateway from the router using ping command.
But, from my laptop, I'm able to p…
-
Right now our firmware is really big with 4.2MB. I talked to @stargieg and he recommended the following options:
- disable debug flags
- CONFIG_KERNEL_DEBUG_*
- KMOD_MAC80211_DEBUG_*
- reduce cove…
-
hello,
since the version 0.50, i have this problem.
![Capture](https://user-images.githubusercontent.com/45976397/59150902-d8ad3400-8a2a-11e9-806f-d89021d56462.PNG)
i have reinstall the router, t…