-
Hello!
So, as far as I can tell, I've managed to successfully flash FreeExpression on my CREX001, compiled the firmware (without any changes) via Microchip Studio 7.0, uploaded via AVRDude and the…
-
Dear All,
I've uploaded the ariadne bootloader into my arduino UNO board and want to flash blink program via USB port.
Getting verification error while uploading,
_avrdude: verifying ...
avrdu…
-
simulide
https://simulide.blogspot.com/p/blog-page.html
-
### Describe the Bug
Found this issue earlier, today just pulled latest dev branch and flashed it again to make sure the firmware is up to date. Tested on two different machine, 1 desktop PC and my l…
-
``Hello, I am trying to get ATmega4809 on Arduino Nano Every working with serial programmer. Thing I have done:
1. Removed level shifting transistors that connected SAMD11 used as UPDI programmer to …
-
```
What steps will reproduce the problem?
This is an enhancement request to investigate a possible custom kernel.
Duane's inquery
After our discussion of implementing BASIC in propforth with a mi…
-
Everything is working great but it's not capturing caps or special characters...it's just logging as if the shift key wasn't pressed...am I missing some setting I need to specify in the code to enable…
-
hi , i use HVPP to repair fuse with a Arduino UNO ,and got success message.
and then i burning bootloader with ScratchMonkey(STK500 MODE),
i got following message. i don't know how to fix it.
…
-
Tested motherboards:
Asus P2B-S
QDI P6I440BX/B1S
Expected Behaviour:
After executing the OpROM, the system should boot from an inserted MS-DOS 6.22 boot diskette.
Result:
The system boots …
-
```
What steps will reproduce the problem?
This is an enhancement request to investigate a possible custom kernel.
Duane's inquery
After our discussion of implementing BASIC in propforth with a mi…