-
Hi,
I was able to decode RF signal with NewRemoteSwitch, but dont know how to transmit this data via RF-Switch. Maby U can help me with this:
```
Code: 31505394 Period: 257
unit: 14
groupBi…
-
I have Mac, Arudino 1.8.1
Have installed ESP8266 for Arduino
Bounce2
PubSubClient
ArduinoJson
When adding Homie 1.5.0 and attempting to verify it always fails with the following:
`Ardui…
-
Hey Theo,
back with yet another new product.
* https://www.itead.cc/sonoff-sc.html
* https://www.itead.cc/wiki/Sonoff_SC
Are you personally interested in extending your firmware for it?
-
short version: any tips on what would be the best way to add support for multiple brokers ?
First, thank you for your work!
I run a small home automation network based on three mqtt brokers that are …
-
It seems like to logic behind the ping and keepalive is buggy.
No matter hwat keepalive i set, the ping is always send after 6-8 seconds.
I believe the expected behaviour is to send a `PINGREQ` af…
-
Building with `platformio`, worked fine until yesterday (I happened to start a new project right as ArduinoJson dropped 5.8.0, noticed older projects were still working).
https://github.com/bblanchon…
-
Since homie manages the wifi and mqtt connections, is it possible to sync the board time of the esp8266 to an ntp server (i.e. running at the wifi ap)
i dont think it woud be wise to use homie on th…
-
{"name":"mosca","hostname":"dev0003","pid":14618,"client":"push/4409b077adf1f29","level":40,"err":{"message":"read ECONNRESET","name":"Error","stack":"Error: read ECONNRESET\n at errnoException (ne…
-
-
After Homie-ESP8266 is up and running, if I restart WiFi, then homie-esp8266 module doesn't reconnect to the WiFi.
This is happening both in Master and Develop branches
is this a bug or am I mis…