-
I have a PT202 with installed Hack B091QP .
Is there a possibility to provide a HTTP Port such as 82xx.
I would like to use the PT202 with my DVR that uses a NETIP ----> 192.168.0.129:82xx
On my DV…
-
I removed the irrelevant questions below. My question for the Arlo Pro is if RTSP can be forced over RTSPS. The reason for this is that I would like to use the Arlo Pro with my Synology.
Thanks!
…
-
### Describe the problem you are having
hello, I updated to Frigate 0.12 and want to use the bundled go2rtc version 1.2. After restart of frigate add-on the protocol shows the Warning: 'Failed to ge…
-
Hi
I'm new with onvif protocol and also rtsp protocol.
My goal is to stream my IP camera to Reactjs
After following the example.js when I get the stream URI, I'm receiving an rtsp uri:
[ex…
-
## The problem
ONVIF camera uses IP reported by camera, not the configured in configuration.yaml. This is bad, since camera can be behind some VPN or NAT.
## Environment
- Home Assistant …
-
As mentioned in https://github.com/maciej-or/hikvision_next/issues/58 the camera details are not fully discovered, this is still valid with version 1.0.7
Debug log from reloading integration:
```
…
-
Hi,
I have 3x Midea AC, they are the same type.
All 3 were working just fine 1+ weeks ago, but since some recent update, only 2 of them are working.
The one which is not working has probably differ…
-
-
### The problem
Hello,
I have currently 3 devices (cameras) running in my Onvif integration.
This used to work without any issue.
I always install the latest version of HA Core, but after the…
-
Reolink released a [POE and Wifi Doorbell](https://reolink.com/us/product/reolink-video-doorbell/). The Doorbell ding (referred to as Visitor) is published on ONVIF in the tns1:RuleEngine/MyRuleDetect…