-
```
Originally Reported by westfw, May 25 (4 days ago)
If you "disable motors" in the manual control panel, and then "Start" a
plot in the plotter panel, the motors will of course be enabled, but the
…
-
Awesome !! Now I have the GRBL flashed and works like a charm controlling my X,Y axis on my mugbot/painter like I want.
Now I need to make it control a simple standard servo for the penlift "http://…
-
Arduino IDE 1.6.6 "hangs" for up to a minute or more when starting on Win 10 on a MS Surface Pro. It ALSO hangs for a long time on any file save, any file open, and on closing. It hangs up on running…
-
Hello Sputlik My name is Willian and i want to understand better your aplication..
and I want to start with some question.. how can i transform a hpgl to txt file ?
-
```
Originally Reported by westfw, May 25 (4 days ago)
If you "disable motors" in the manual control panel, and then "Start" a
plot in the plotter panel, the motors will of course be enabled, but the
…
-
I want to actuate a pen on an XY plotter using a servo motor. I was thinking of using the spindle_control.c code to do this but I don't know how. Please help.
-
I have built a plotter that i have wired a solenoid that moves the pen up and down, to the spindle control. When i send M3 and M5 commands several times to GRBL (latest from the dev branch) it will ha…
-
After digging through the code I found that the `--scale=n` arg is able to scale up but it doesn't seem to work going down or at least not with decimal values.
Also is there an arg to tell z axis wha…
-
After 'lots' of work (more than expected), I've completely overhauled the g-code parser in the development branch of Grbl. Grbl v0.9e should be 100% (or near) compliant to the g-code standard. This wa…
-