-
- It's not clear from the existing examples how to read ID/PAC or switch to CW test mode using your sigfox API. This would be a nice addition to the sigfox example.
- The "sigfox_send_payload" fun…
intdb updated
6 years ago
-
Hi,
I use a Siemens Simatic IoT2040 with Node-Red embeded.
Eth0 : Internet (DHCP)
Eth1 : my computer (192.168.200.10)
I use local connexion to access Node-Red dashboard and Eth0 to transmit…
-
There is a little hiccup involved when you mix OTA and USB flashing.
OTA uses two memory areas for the firmware and toggles these. Let's call these A and B. On bootup, the bootloader checks a flag wh…
-
Hello,
I have a stability problem with my SiPy that I can not explain. It restarts without explanation and randomly.
First here is the firmware information:
(sysname='SiPy', nodename='SiPy', re…
-
Investigate how to get current timestamp from Arduino
Implement threshold logic:
- Proximity: Push data after collected sensor data is above and then below threshold
- Timestamp for start an…
-
Two other users plus myself are reporting this in detail [on the forum](https://forum.pycom.io/topic/2335/timeq-and-uasyncio-on-wipy-2-0-or-3-0/5).
`utimeq` is required by `uasyncio`, a very useful…
-
I want to see the different methods of the class Bluetooth. which file I have to open?
I use pymakr.
Thanks!
-
Please, can you show how to use MQTT connector?
-
Hello!
I have gateway and thingsboard on version 1.4.0, both installed on same computer.
I tried to use the gateway to connect to OpenOpcUa server with the following error.
`14:23:33.806 [pool-3-…
-
1. I did a Fresh new git pull and submodules update
pycom-esp-idf.git
pycom-micropython-sigfox
Then:
**$ cd mpy-cross
$ make all**
Use mak…