-
wan口使用PPPoE拨号获取公网IP，wan6支持6to4（IPv6 over IPv4）获取（IPv6: 2002:65e3:b12e::1/16、IPv6-PD: 2002:65e3:b12e::/48），这时lan的信息是（IPv4: 192.168.2.1/24、IPv6: 2002:65e3:b12e::1/60），试过所有的组合（IPv6 ULA 前缀有和没、IPv6 分配长度60和…
-
## Expected Behavior
MLVPN functioning properly through luci ui.
## Actual Behavior
No way this will work out of the box, need to do this for it to work:
/usr/sbin/mlvpn --config "/tmp/etc/m…
-
I use a 6in4 tunnel for my IPv6 support. Unfortunately, bmon just shows the entire IPv6 path as a single "connection". It would be nice if there was a way to get it to look at the wrapped IPv6 header …
-
hi
I have a vps (1vcpu and 512mo of RAM) at ionos
But my router said alwaus that my vpn not respond.
I have tested all version 0.53.3 and 0.54rc7
but there are not good config who work.
-
## Expected Behavior
My download dont up 50mbps...
I have two 100mbps download an one 4G link
## Steps to Reproduce the Problem
1.Speed test
## Specifications
- OpenMPTCProuter ve…
-
On 18.06.0,
1. You got an IPv6 tunnel interface, say 6to4 or 6in4.
2. Create a ddns entry, choose "IPv6 address".
3. And choose "IP address source" to be "network", along with "network" to be you…
-
## The bug
I tried to install _libreswan_ from sources.
I compiled and installed using:
```
root@:~# make programs
root@:~# make install
```
Then I configured a new connection:
```
#
# /et…
-
最新版的Transmission端口51413一直显示关闭，无法打开，无法连接PT服务器，尝试过openssl和mbedtls两个2.92的版本，安装了所有的软件包（luci、daemon、cli和remote），防火墙已在流量规则中添加开放端口“Transmission | 任何 tcp, udp | 来自 所有主机 位于 wan | 到 所有路由IP 在 port 51413 位于 本设备，以…
-
Hello,
The MPTCP router is unable to ping my gateway (ADSL and 4G routers). I'm also unable to ping my laptop or my gateway from the router using ping command.
But, from my laptop, I'm able to p…
-
Right now our firmware is really big with 4.2MB. I talked to @stargieg and he recommended the following options:
- disable debug flags
- CONFIG_KERNEL_DEBUG_*
- KMOD_MAC80211_DEBUG_*
- reduce cove…