-
Procedure:
1) Insmod Kernel Module
`insmod esp32_spi.ko`
2) Wait for ESP Device handshaked success!
3) Remove Kernel Module
`rmmode esp32_spi.ko`
Device Driver hangup at step https://github.c…
-
Hello:
Here my setup:
esp-idf: V5.1.1
esp-adf: V2.6
Hardware: ESP32-S3-KORVO-2 3.1
PBX: Asterisks running on a rapsberry pi
In general the system works, I can make and receive calls with aud…
-
I enabled the
#define MICROPY_RLOTTIE 1
and then I call
python3 make.py esp32 clean BOARD=ESP32_GENERIC_S3 VARAINT=SPIRAM --flash-size=16
but it dosent works, it says:
/workspace/lvgl_micropyt…
-
As title.
I have some errors when trying to flash on Lolin ESP32-S2 mini and Lolin ESP-S3 mini.
It works well on Lolin ESP32-C3 mini.,
I have tried on TinyS2 and TinyS3 from UM and same errors.…
-
I'm pretty sure its something I've done as I'm not familiar with PlatformIO. But, I thought I faithfully followed the instructions but it looks like I've come unstuck here and after a bit of going ro…
g7kse updated
11 months ago
-
I am using ESP32-S3-Touch-LCD-4.3, and when running the example WiFiClock in ESP32_Siald_Panel, the serial port keeps outputting, but the screen does not respond. I would like to know where the proble…
-
### OS
Windows
### Operating System version
Windows 10
### Visual Studio Code version
_No response_
### ESP-IDF version
5.2.1
### Python version
3.11
### Doctor command output
Nothing
### …
-
### The problem
Hello,
board: Lolin ESP32-S3
I'm trying to get the LED (WS2812) on the board to light up. But it doesn't want to compile with that exact pin(gpio 38).
Thanks in advance!
### W…
-
When I tried to compile according to the tutorial, the compiler prompted that STATIC was unknown. After trying to change it to lowercase, although there were warnings, it was able to be edited, but ul…
-
### PROBLEM DESCRIPTION
On the physical level, there are two or three devices involved with Nuki Hub (one of 2. and 3. is optional):
1. The ESP32 running the Nuki Hub firmware.
2. A Nuki Smart Loc…