-
**Describe the bug**
I just installed the Python 3.7.7 version and when I used "pip install pymatgen" to install pymatgen, but the terminal gave out error information as:
~~~~~~~~~~~~~~~~~~~~~~~~~~~…
-
The new version of the MPPT hardware contains a rotary switch to select the charger operating mode. Different charging profiles for different batteries (VRLA, Gel, LiFePO4, Li-Ion, etc.) should be add…
-
1. The paper
Dragana Jugović, Miloš Milović, Valentin N. Ivanovski, Max AvdeevORCID, Robert DominkoORCID, Bojan Jokić, Dragan Uskoković
Structural study of monoclinic Li2FeSiO4 by X-ray diffraction…
-
Hi,
I have been thinking about a good way to break down the configuration of the system and came up with this breakdown:
We have
- PCB configuration: These define maximum operational limits, an…
-
Hello
First I should thank you for all your contributions to the creation of intelligent systems we can use for our boats etc. I were already aware of you contributions to the development of CAN-syst…
-
golang version 7 and 11.5 tested.
called by gravo -api http://localhost//middleware.php -url localhost:8001 (the -port option mentioned in the README does not seem to exist (anymore)).
Using the -v…
-
I operate a BME280 with a [ESP8266 on a bare board](https://internetofhomethings.com/homethings/wp-content/uploads/2015/05/20150519_ESP8266-adapter-apart.jpg), with a 1000uF capacitator connected betw…
-
I have a good battery on my workbench which is green on the charger and is sitting at 76.75 volts. The serial monitor reports every other cell group with roughly the same voltage, however they don't s…
-
When I try to send a lot of data, some of the data is lost.
I test on
gateway lolinESP8266 + nrf24l01 nrf24l01 pa lna + 100uF, checked all parameters pa level. Chanel 76/100/10 Lib ver 2.3.1/2.3.0
…
-
@DhavalGambhava please take the layout from /batterycase from @case06 and extend it with
- components: MPPT, BMS, inverter, batteries
- plugs:
- SolarInput
- DC-Output (Fuse integrated),
-…