-
Hey, I've been using you're complete network example to record data such as packet loss rates vs. no of nodes and delays vs. no. of nodes etc. I had a question regarding the randomness of the simulati…
-
- [X] The issue is present in the latest release.
- [X] I have searched the [issues](https://github.com/brocaar/chirpstack-concentratord) of this repository and believe that this is not a dup…
-
Hello,
First of all, I would like to apologize for opening a closed issue yesterday. I am new to Lora and Lorawan environments. I have a Heltec Wifi/Lora v3 with SX1262 lora chip and using Visual …
-
I plan to use RadioLib for receiving a LoRaWAN downlink transmission. I'm using the latest version of the library (6.4.2) on the Arduino side, along with its example file for uplink communication. I'm…
-
I have been to communicate LR1110 IC with a gateway with LoRaWAN protocol. After setting the parameters as per LR1110 User Manual, i used set_tx function to transmit. The packet is received at the gat…
-
The "Heltec (unofficial)" board doesn't appear in the Boards Manager when using Arduino IDE V1.8.x.
After identifying this issue I managed to install the board successfully using Arduino IDE 2.x.x …
-
Wondering if there's any compatibility with loraWAN gateways that use LoRaWAN concentrators. Specifically the Draguino DLOS8 that uses a SX1301 LoRaWAN concentrator. 1 x SX1301 + 2 x 1257 LoRa Trance…
-
I managed to get a connection and the code reports the voltage for each individual cell but for some reason I cannot het the basic data
eg : Volts , Amps , Capacity Remain Ah - they all show 0.000 va…
-
I flashed my ESP32-S3 (don't have a C3 on hand) with the esp-idf v5.x branch but identical happens for v4.x.
There are multiple problems, but one of them is this: as soon as an uplink is received, th…
-
设备名称：PantherX2 Hotspot（黑豹X2）
官网：https://shop.panther.global/
用户指南：https://g.itemz.cn/sgwBfS
配置：
处理器: 瑞芯微，RK3566，四核 Cortex-A55 高达 1.8GHz
内存：DDR 4GB
储存：eMMC 32GB+ TF卡64GB
![image](https:/…