-
[Google Groups](https://groups.google.com/forum/#!forum/idris-lang)
imuli updated
8 years ago
-
我用了此项目编译出的程序在路由器上认证锐捷, 过一段时间会出现只有ipv4而失去ipv6连接的情况, 同时用官方锐捷客户端认证一切均正常, 我用你的项目的代码半年了, 之前未出现这样的问题, 这学期才出现....
而且很诡异的时好时坏, 由于我用ipv6只上蝴蝶才用到, 蝴蝶重新开放后, 我出现过偶尔不能访问的情况, 以为是蝴蝶网站出问题了, 后来发现别人都可以正常访问....
现在的情况是路…
-
- package wifitoggle, as-is
- package restorefactory, with some configuration
- LED configuration?
#### LED Configuration Notes
From the Netgear setup guide ftp://downloads.netgear.com/files/WNDR3700…
-
Hi there!
I am trying to enable telnet on an RAX50 with FW version V1.0.12.120_2.0.83 (the same as mentioned in the supported devices list). However, when I run the command, I only get this output …
-
Hello,
First, thanks a lot for releasing this driver, it helped me a lot to get my netgear AC600 (Realtek RTL8811AU) work !
The wireless connection works very fine. However, I get some kernelOops er…
-
Version: 0.5.2
Router: Netgear R8000
Use case: homeassistant 0.89.2 device tracker
When I configured my device tracker and booted up homeassistant, I can no longer access the router's web ui via …
-
### Describe the bug
installed xray-core 1.8.3 using opkg
the service script was installed to /etc/init.d/xray, but the service wasn't autostart.
try to service start xray, it still didn't work.
#…
-
Tested to install a fresh setup on both RaspPi3b+ and Virtual machine running Linux on a Laptop.
Everything is the latest version, including tuya_custom. Get the same problem on both.
Smartlife app …
-
When using a non-standard (but completely supported) wifi dongle, kano-wifi bombs out with the following:
Traceback (most recent call last):
File "/usr/bin/kano-wifi", line 358, in
iwl = IWLis…
-
```
Summary pretty much explains it
I've tried an open source C++ project and it worked, so maybe this needs
updating?
I'd love to see something in C# though : )
Also at my friend's house same thing, …