-
I'd like to get this display working with fbtft and have not had any success so far:
2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket - ILI9341
PRODUCT ID: 1770
https://www.adafruit.com/…
-
PI 2 b
3.5 pitft tft + touchscreen
Octopi .12
Pygame
First, it would be nice if someone wrote a guide from a "Octopipanel for idiots" view point- a detailed step by step guide to get a screen installe…
-
no /dev/input/touchscreen:
```
[dev] [mav@raspberrypi ~/tmp/mopidy-touchscreen/mopidy_touchscreen]$ dmesg |grep stmpe
[ 4.368428] stmpe-spi spi0.1: unknown chip id: 0x0
[ 4.368512] stmpe-spi: p…
fnoop updated
8 years ago
-
Is there a way to use a modified fb_ili9340.c with a corresponding -overlay.dtb file? I changed fb_ili9340.c to support the 3.5'' pitft's resolution and im able to get it working by using the commands…
-
I had no luck getting the Adafruit PiTFT working on a Raspi 2. My steps were as follows:
Clean OctoPrint install - Expanded disk, set password, region, and time zone.
Reboot
From web UI, install lates…
-
Hi
I have Raspberry Pi with Jessie and PiTFT 2.8" TFT 320x240 + Capacitive Touchscreen - Raspberry Pi Model B of Adafruit (https://www.adafruit.com/products/1983)
I want run moonlight in PiTFT, but…
-
Hi! I'm trying to use a dual voltage mmc of 2GB, labeled Kingston., to burn a raspbian image on it.
But i discovered that i can't, in the sense that everytime the ACT led is saying that the .elf file…
-
Hi Josh,
This is just the project I am needing to get working on my Pi.
When I go through the setup instructions in the readme.md it seems to do what is expected but when I try the "node demos/c…
-
Hi,
using the screen, does exist a way to launch the terminal?
Juan Antonio
-
this tutorial: https://learn.adafruit.com/running-opengl-based-games-and-emulators-on-adafruit-pitft-displays/pitft-setup
tells you how to set up a pitft screen with the retropie, however in the last…