-
hf mf autopwn does not work and loop on `#db# AcquireNonces: Auth1 error`
**To Reproduce**
Steps to reproduce the behavior:
1. Try hf mf autopwn on on mifare classic with HARD prng
2. The hard…
Fl0-0 updated
5 years ago
-
like the other issue: https://github.com/RfidResearchGroup/proxmark3/issues/397
**proxmark not responding**
after a hf search command the leds "A and D" ligth up.
**for reproduce**
promark3 -c…
-
**proxmark not responding**
after a hf search command the leds "A and C" ligth up.
**for reproduce**
promark3 -c "hf search"
```
pm3 -c "hf search"
[=] Session log /home/vincent/.proxmark3/l…
-
**Describe the bug**
A clear and concise description of what the bug is.
**To Reproduce**
Steps to reproduce the behavior:
1. Run "lf t55 dump p 00000000" on card without password block
**Exp…
-
**Describe the bug**
I have observed that the RDV4 LF antenna appears to have some degraded performance on some T5577 tags. While I have observed the issue on a few generic blank T5577 cards, in my …
-
**Describe the bug**
Hi,
thank you for all the good work on proxmark3 software.
I can't get `hf mf autopwn` to dump a particular mifare classic 1k card. These are the approaches I tried:
1…
-
Fresh out of the box, tested with multiple different RFID tags as well is multiple antennas (HF and LF).
[https://youtu.be/tGSCjqT-JKE](url)
-
**Describe the bug**
Just started playing with this fork today and I noticed that all of the cards I have are being incorrectly identified as Chinese magic cards (GEN 1b). These cards are from random…
-
**Describe the bug**
When I attempt to write a 37-bit ID to a t5577 card, it only writes a 26-bit ID to the card.
From the "lf hid clone 1029a0f4d2"
**To Reproduce**
Run the following comman…
-
**Describe the bug**
"hf iclass clone" command appears to have an issue where the last block in the write range will fail to write. If only one block is selected, it will fail to write. The behavio…