-
After upgrade to Version 10.0.0 the BMP180 Shield on an WEMOS or D1 mini is not found any more.
Update was done over the air with: http://ota.tasmota.com/tasmota/release/tasmota.bin.gz
After down…
Nesie updated
2 years ago
-
Hi,
in the documentation, you mention a multi relay setup. Actually, there are pins for the power supply (5V) for a second (external) relay. But I can't find the pin to connect to the D6/GPIO12 as …
siedi updated
2 years ago
-
### PROBLEM DESCRIPTION
After Upgrade to Version 10.0.0 the BMP Shields are not recogized on D1 Mini and WEMOS anymore
Upgrade was done over the air with: http://ota.tasmota.com/tasmota/releas…
Nesie updated
2 years ago
-
Information for t-camera users.
I have Wemos 18650 single battery shield. I have a t-camera v1.6.2. The t-camera works fine hung of a PC via a powered USB hub. The t-camera does not appear to…
-
Did you ever think about adding GPIO-output capabilities?
Thought, this might be a great feature to:
- create individual status-lights/displays with LED's (eg. DHW is on, Heating active, etc....)
…
-
First of all I would thank you for this great project, it's really a nice way to learn an play with DCC and the ESP32.
I'm however facing an issue with current readings/reportings.
### Setup
- …
-
I have a couple of ST7735 displays
https://www.arduino.cc/en/Guide/TFT
They are cheap and SPI. Thought they may be added to the framed display plugin.
-
The board drops off the network after sometime. The most its stayed on the network is about 5-6 hours. I've tried using the Disable WiFi sleep option, used boards from different brands & also used 3 d…
-
waveshare epaper display 2.13 are:
>>>2.13in (not tested)
>>>2.13in-ttgo (T5_V2.3 tested. Also works for Wemos D1 Mini ePaper Shield 2.13 1.0.0 “LOLIN”)
>>>2.13in-ttgo-b73 (T5_V2.3 with B73 display…
-
**Describe the bug**
Used the latest yaml example, the firmware is compiled just fine, I upload it without an issue and restart the module. On restart if the sensor is not connected the WiFi is conne…