-
Hi there
Thanks for your hard work first.(Forgive my poor English plz,I'm just a middle school student in China and English is not my native language.)
I'm trying to port CM13 to my klimttd also as …
-
SWRC has deployed several of these sensors, and LimnoTech is about to deploy one in the next weeks.
SQ-212: Amplified 0-2.5 Volt Sun Calibration Quantum Sensor
https://www.apogeeinstruments.com/sq-2…
-
After the building of the `devel` branch this evening; looking at the `tree` listing (see below) two odd things caught my eye.
First is the fact that some files were created in "The Future" and the …
-
I am trying to convert your image to be installable by NOOBS/PINN.
If I remove the `/boot/autoexpand_root_partition` sentinel file as recommended then the raspberrypi64 password does not get set. In…
-
I am trying to use node-ads1x15 on the CHIP (http://www.getchip.com) and CHIP has multiple I2C buses. The one we want to use is /dev/i2c-2. This issue requests the exposure of the parameter that def…
-
How do I interact with the Explorer Hat using Node? Can I just write to the outputs for example using an existing node-based GPIO library or do I have to do something special?
-
```
[k0ste@WorkStation linux-4.12]$ patch -p1 -i /tmp/linux-4.8-ndpi.diff
patching file include/net/netfilter/nf_conntrack_extend.h
Hunk #2 FAILED at 113.
1 out of 2 hunks FAILED -- saving reject…
k0ste updated
7 years ago
-
```
root@LEDE:~# nsjail -Ml --port 9000 --chroot /chroot/ --user 99999 --group 99999 -- /bin/sh -i
[2017-10-15T10:02:43+0000] Mode: LISTEN_TCP
[2017-10-15T10:02:43+0000] Jail parameters: hostname:'…
ebadi updated
7 years ago
-
I would like to request a feature of making an Arduino flashed with Firmata an I2C slave. As embedded Linux systems get cheaper and easier, features such as I2C become more attractive since UARTs on …
-
# A/D Converters
Raspberry Pi has not analog inputs. This are important for the design of the new SmartServo prototype.
The prototype we have built until now has 4(5) ADC to measure: Position, Curr…