-
1 minute is cool for most common use, but maybe it's a good idea to implement adjustability for this parameter via Bluetooth, the same way as it [was done](https://github.com/atc1441/ATC_MiThermometer…
-
First of all, wow, this looks amazing 🎉
I didn't know that custom firmware for this device was possible, thanks to you, now I know it is 🙂
I'd like to ask if it would be possible to support other …
Misiu updated
4 years ago
-
Hi,
I bought two LYWSD03MMC sensors, flashed custom firmware through Telink Flasher and one is working great, i get temp/humidity/battery readings as expected but i have a problem with other one.
…
-
HA says 100% using official firmware, while custom firmware shows minimal battery icon on LCD
-
Great work you did, but after flashing the firmware I do not see the device anymore under Windows 10 device lists.
If I open your TelinkFlasher page the browser is able to find the device, but I'm no…
-
Hi so i am using the Core on an nrf52832 and nrf52840 Smartwatch with the FreeRTOS enabled and it works like it should but as is allready known the power consumtion is not optimised.
So i am using …
-
Hi!
I really need your help.
I'm facing a problem with one of my LYWSD03MMC sensors.
For now I have 2 of those integrated to my HA, but one of them (MAC: A4C13801B8CB) keeps losing connection. Re-a…
-
One thing that bothered me for a while now is that it was not possible to calibrate the sensors, even though various sources (e.g https://github.com/JsBergbau/MiTemperature2#calibration ) mention that…
-
After long time of waiting and ordering two times, finally today my P8 arrived.
It was powered on and worked first few minutes, now it seems like touchscreen is not responding (still on stock).
Any …
-
i have been trying to run some custom code and although a fresh clone compiles fine, a bootloop is caused by the init_accl function. i have nailed the problem down to the first do...while loop:
```c
…