-
Hallo shining-man,
das ist mal ein richtig tolles Projekt. Vielen Dank für das zur Verfügungstellen.
Mein Wunsch wäre bis zu 6 JK-BMS einzubinden.
Momentan sind es zwar bloß 3 und somit in der je…
-
### Describe the problem
I´m running a Victron 3ph ESS System with CerboGX and 4x JKBMS 16s and nodered with some actions
The system runs fine without the serial driver regardless which version.…
-
Hi Syssi,
I just wanted to inform you, that the BLE ESP32 configuration works with two JK-B1A8S10P BMS devices.
I am using the JK02_32S protocol.
HW ID: V11.XW, SW ID: 11.261.
Cheers
Ed…
-
### Describe the problem
Hello i have a JKBMS JK-B2A24S15P-C used for a lifepo 16S 280Ah Battery.
Charged by a Mppt Easun IGrid 5600, with an ESS System Victron multiplus 5000.
The JK BMS is co…
-
Originally posted by **cfi700** July 29, 2023
First of all, thanks for the great project.
While rebuilding (with Arduino Nano Clone) I noticed the following problems:
PIN SCL is not PIN A3 bu…
-
### Describe the problem
I updated to the latest dev-Version and rebooted the GX. It never established the serial connection again. After returning to the latest Version of the master branch it worke…
-
Hi @syssi ! I was just testing version 1.50 and came across this unknown logs. Not sure if it's relevant but just wanted to share in case it's something missing or new! Thanks for all your hard work
-
https://github.com/syssi/esphome-jk-bms/discussions/261#discussioncomment-5098466
-
### Describe the bug
Hi,
"With a USB connection, everything is OK. Thank you again for this excellent work.
However, the number of USB ports is not sufficient to my project, so I have to use the BL…
-
`./release-64bit-windows.cmd` 로 생성한 C 코드를 https://onlinejudge.icpc.global/team 에 제출하였을 때 컴파일 에러를 받습니다.
```
Compiling failed with exitcode 1, compiler output:
/usr/bin/ld: /usr/lib/gcc/x86_64-linu…