-
Hi !
It could be nice to have the transmission retry on the RX2 window feature.
As defined in 3.3.2 of the lorawan 1.1 spec, the implementation of the retry feature in case of error from the packe…
-
anybody could tell me ?
how can i get the demo board or the Schematic diagram ?
Thank you so much...
-
How does the authentication works? A device (leaf) is pushed the AppKey from IoT Hub device twin. Is IoT Edge afterwards quering IoT Hub to retrieve th AppKey for that device and authenticate the comm…
smoms updated
5 years ago
-
Hi,
possible change software (add #define ... to library.cfg for example) so i can use GPIO mode 2 and GPIO0 as "rx_buffer_not_empty" on PIN7 to implement interrupt mode on RPi ?
Thanks in advance…
-
### Is this a bug or a feature request?
Bug
### What did you expect?
In the Class-B mode, the ping-solt downlink should be sent from the forwarder side.
### What version are your using?
…
-
### Is this a bug or a feature request?
Bug.
### What did you expect?
Receive an acknowledgement.
### What happened?
The server does not send ACK packet actually, but registers the reply pack…
-
Hi Brocaar,
Can I use another GNSS module to successfully verify class-b downlink flow except the u-blox7 ? or what should I do to successfully send a class-b downlink packet from forwarder side wit…
-
I am using Sx 1301 with Rpi as gateway and nodemcu with Sx 1272 as node. Packet forwarder is runnnig in Rpi and example program (ttn abp) from arduino lmic master is running in node mcu.
Gateway is a…
-
hi, I have been trying to get GRPC to compile in my ARM cross compilation environment, and I am not having much luck. I've tried to compile it with.
```
make HAS_PKG_CONFIG=false CC=arm-linux-gnuea…
borud updated
6 years ago
-
Hi gothardp,
I'm trying to integrate the server to aws IoT core using the connectorr as you have described in the documentation. I have also looked at other issue up on the forum and ensured that …