-
I had problems to stream my movies from my NAS and discovered low wifi speeds.
I mounted the smb share directly to my RPi 3 and started copying files. Maximum speed is 15Mbit/s. Which explains my pro…
-
@NeoRaider
At your request
Hardware: TP-Link ARCHER C2600 v1.1
Gluon: v2016.2-244-g13c61d9
If you reboot the router there is a shutdown with all LED going off.
You must use the power switch …
-
*lynxis:*
board: TL-WR1043ND [v1]
version: reboot-2823-g3e7b894
- connect one or multiple clients to wifi
- create some traffic e.g. speedtests
- connection disconnects after 2-3 minutes
- wif…
-
*lynxis:*
board: TL-WR1043ND [v1]
version: reboot-2823-g3e7b894
- connect one or multiple clients to wifi
- create some traffic e.g. speedtests
- connection disconnects after 2-3 minutes
- wif…
-
My messages are being greyed out and are not being delivered.
It started happening out of the blue, some days all went well, then it started.
After a while it was working again, now it's not for mor…
-
Due to recent changes the CTR-mode speedtests result in a segfault.
```
Reading symbols from ./botan...done.
(gdb) set args speed AES-128/CTR-BE
(gdb) run
Starting program: /home/never/build/botan/bo…
-
There's a hand-rolled SpeedTests.cs that's quite primitive. Look into something like https://github.com/PerfDotNet/BenchmarkDotNet.
-
Using the service file provided in the wiki did not allow the service to start, even though starting it manually ( in screen or otherwise ) worked perfectly fine. It was giving the following error:
`…
-
Tried your test server using Firefox 50.1.0 on Fedora 25 and it reaches around 8.5Mbit then freezes the browser maxing out the CPU. After a while Firefox reports the tab has crashed and the PC is res…
-
![image](https://cloud.githubusercontent.com/assets/20476168/17455922/c052df68-5bcf-11e…