-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I have an ESP32 Devkit C board and a 2.4" TFT Shield with a red board color. The shield has pins on both sides: one side has parallel data and SD pins, and the other side has CS, RST, WR, RD, F_CS, an…
-
I have an Ender 3, MKS Robin E3, MKS TFT35, MKS 3D Touch, MKS FES. Marlin 2.0.9.2: I managed to configure and compile it all - it works :). Unfortunately, I can't connect the computer to the Robin E3 …
-
If I go to Settings->About System, both "LORA init" and "TF Card" show "FAIL" on a brand new device. how do I fix that?
-
I recently noticed that `PICO_FLASH_SPI_CLKDIV` was not having any effect on my project ported to RP2350, whereas it worked fine with RP2040 before.
This reproduced when using the stock Pico 2 and …
-
```
What steps will reproduce the problem?
1. Plug in an FTDI device with multiple interfaces (e.g. FT2232H w/IFACE_A,
IFACE_B)
2. Connect to the first one (successfully), using e.g. SPI:
mpsseA = Op…
-
### Version
2.7.0
### Branch
master
### OS
Raspberry Pi OS Lite - 32 Bit Bullseye
### Pi model
Zero 1
### Hardware
Raspberry Pi Zero WH + Pirate Audio Mini-Amp with Display …
-
Hi. I am trying to connect usb host shield with NodeMCU. I cut the traces (both 3.3v and 5v) from vbus but when i use my multimeter to check the continuity between 3.3V pin and Vbus pad i still get co…
-
For current bugs:
- [ ] #109
- [ ] #54
- [x] #125 (3.)
- Add a test, which checks, that the pull state is correctly reset, when transitioning the pin type state.
and definitely more:
…
-
Hi DediProg team,
I recently received a new SF100 programmer and try to connect to my Linux computer, was able to built the software tool but got an issue to connect it.
```
$ ./dpcmd --list
DpC…