-
Hi, first of all thanks for this great library, great coding here.
I have some questions / suggestions.
I noticed an undocumented option when looking at the library > relSpeed.
I assume an intend…
djamu updated
5 years ago
-
Dear Jay.
May you send me any information about the motors you used in your robot?
Model \ Part N \ Manufacture.
Or just a photo of the motor's label.
You can also use my E-mail: Equipa@mail.ru fo…
-
In lr-mame2003 you just need to hit ESC twice and it will reset the field to 'NONE' with Plus ESC just adds it as input. The only way I know to blank the field is delete the default.cfg and start over…
-
Hi all,
I am following the steps described in https://libvirt.org/kbase/launch_security_sev.html to enable SEV in the kernel of my AMD Ryzen 5 PRO 2400G (with Ubuntu 18.10). However, for some reas…
-
- Cilium version (run `cilium version`)
`1.5.4`
- Kernel version (run `uname -a`)
`Linux ip-172-21-53-107 4.9.0-9-amd64 #1 SMP Debian 4.9.168-1 (2019-04-12) x86_64 GNU/Linux`
- Orchestration s…
-
I love the updated UI- it's much easier to generate patterns quickly by scrolling the parameter values. I generated a bunch of gcode today and for some reason the files contain coordinates far beyond…
-
#### Description
I have a flashed Marlin machine (version 1.1.6, I configured). When I connect with Marlin, I see the output of the M115 command, and for whatever reason, it doesn't end in 'ok'.
…
-
### Issue description
Ciao, sto trovando problemi nell'installazione del bltouch smart v2, ho letto vari post su reprap seguiti dal mago ma niente non ne vuole sapere. Si accende solo il led rosso e …
-
@jameskolme If you actually need that sort of formatting it's not that hard to add. The old .txt was an export from Embroidermodder which I neglected to port. If you'd use G-code instead I'd have to k…
-
Dear Chuk,
I've reformatted your BOM, to be a markdown file and added the link to this github repo:
Here is the code:
```
DIY Prusa Multi Material Upgrade (MMU) 2.0
=========================…