-
i have install all packages with
sudo apt-get update && \
sudo apt-get install -y \
cmake \
autoconf \
libtool \
pkg-config \
build-essential \
python-docutils \
…
-
I had a SD card go bad, and of all my Pi's that are running, somehow this is the one I never backed up! So hardware is all the same, I installed a new system using the same settings in config.json and…
-
Hi!
I'm running Blockstream Satellite and Bitcoinfibre on a Raspberry PI 3 with Ubuntu Mate.
I think the decoding part is doing well, here's some logging from `blocksat-rx`
```
nico@sdr:~$ sud…
-
New to trunk-recorder I am trying to monitor the "Kansas Statewide Interoperable Communication System (KSICS)"https://www.radioreference.com/apps/db/?sid=4390 "Harvey County system"
this is my config…
-
Lime SDR seems not to work in 0.18.0 release (install via ready made raspy image)
I do not get any audio or waterfall.
There is a double existence of a Soapy library (might be not related):
```r…
DB3DE updated
4 years ago
-
I installed libairspy 1.1.5 on a Raspberry Pi 3 B+ with Rasbian 9.
```
$ rx_fm -d airspyhf -f 99.9M -v 99
verbosity set to 1
Using device AirspyHF: device_id=0 origin=https://github.com/sevo/Soa…
-
Hello
I get lot of error timeout during the day with new firmware 2.0.0 (was 1.0.0 before)
Same Raspberry PI with same power supply, not overloaded.
Here is a log in daemon.log :
SoapySDR dev…
-
I tried to start with just an SDRPlay RSP1 connected. The WebUI loads, but throws websocket errors. No waterfall is displayed and no profiles can be selected:
OS: CentOS 8
```
$ python3 openwebrx…
-
Running Ubuntu 18.04 on laptop. Below is the output of the build with a few errors that may explain the issue but unsure why we are getting them. Also when getting prerequisites installed the libgnura…
rwcts updated
4 years ago
-
Hello,
can anybody help me to make the Pluto SDR work with qradiolink?
I tried different device arguments, but the program still cannot find the device.
Soapy and gnuradio are installed. Soapy-plu…