-
- https://modellbau-schoenwitz.de/de/Zahnradpumpe-Wasserpumpe-Pumpe-selbstansaugend
- Breadboard
- Double USB power supply 2A
- Arduino
- RedFly Shield
- 200 Ohm resistor
- Transistor TIP121
- Soilmoi…
-
I'm using the MAX 31855 on my arduino uno and I think the library is giving false errors. On both the SerialTest and MuxTest examples, the correct temperature measurement is given, but after a while t…
-
Does this crate work for driving the W5100 chip used by the Arduino Ethernet Shield V1?
-
What can be done with the available hardware ([Arduino Mega 2560](http://www.arduino.cc/en/Main/arduinoBoardMega2560); [MI0283QT2: LCD + Touchpanel](http://www.watterott.com/en/MI0283QT-2); [mSD Shiel…
-
Hello, I use your ariadne bootloader with arduino mega 2560 and standard ethernet shield W5100. Now I have problem with upload this project. When I upload by USB cable standard from arduino IDE, it´s …
-
The Arduino GSM Shield (http://arduino.cc/en/Main/ArduinoGSMShield) is a fantastic resource for a number of reasons, of which a major one is the tedious AT Command configurations are all done through …
-
I extracted part of my comment from #178 because I think it deserved another issue:
Raspberry PI becomes a liability due to their politics and pricing and recent versions become more expensive than…
-
Hi,
as in Issue https://github.com/greiman/SdFat/issues/117
I got problems with the init of the sd-card.
While using SDfat up to version 1.1.4 I could set the max. speed to 40Mhz and the init o…
-
at first i thought it might be EMI so i made sure to get a shielded usb cable with ferrites at both ends
no dice
so i disconnected my entire machine and plugged it into my desktop pc and tried again…
-
For testing purposes I have a Cherry RS 6000 USB keyboard that is connected to the Circuits@Home USB host shield on top of an Arduino Uno R3.
However, when my Arduino device is powered on and the key…