-
## ESP32 Development Status
| PERIPHERAL | ESP32 | ESP32-S2 | ESP32-C3 | ESP32-S3 | ESP32-C6 | ESP32-C2 |
|:-:|:-:|:-:|:-:|:-:|:-:|:-:|
| CPU | :heavy_check_mark: | :heavy_check_mark: | :heav…
-
6. ** Please paste the result of `anbox system-info` below:**
```
version: 4
snap-revision: 104
os:
name: GalliumOS
version: 2.1 (Xenon)
snap-based: true
kernel:
version: Linux vers…
ghost updated
2 years ago
-
Hi all,
I found some time today to retry getting squeezelite to run on my Louder ESP32.
Most of the time, the first attempt to connect to my home wifi fails and squeezelite falls back to AP mode. A …
-
I want to see if an AMD card works out of the box with the drivers built into Linux, as everyone on the Internet seems to say. For X86 Linux, that definitely seems to be the case, but will it work on …
-
One of the resounding things that came out of the discussions at XDC was the mobile guys saying that they don't want to have to do contiguous memory allocation in their GPU driver. Instead, they want…
-
Hello everyone!
I see that one of limitations of USB UVC lib is maximum resolution of 640x480px 15 FPS.
But I need the still image larger than 640x480 but supported by the camera and fits into ESP…
-
### Describe the bug
`iwconfig` reports that the network is not connected:
```
$ iwconfig
lo no wireless extensions.
wlan0 IEEE 802.11 ESSID:off/any
Mode:Managed Acces…
-
1 - `sudo chmod +x install_wm8960.sh`
2 - `sudo bash install_wm8960.sh`
https://github.com/ubopod/ubo-sdk/blob/main/system/setup/install_wm8960.sh
replace seeedstudio driver with this. Tested o…
-
**Describe the issue:** HWC overlays do not work, instead showing "FB" instead of "HWC" or "Overlay" in dumpsys SurfaceFlinger
Using Opensource exynos/exynos5 SLSI bsp sources from LineageOS.
-
My device config
```
substitutions:
name: "atom-echo-2"
friendly_name: Atom Echo 2
packages:
m5stack.atom-echo-wake-word-voice-assistant: github://esphome/wake-word-voice-assistants/m5st…