-
```
I use Koppel's firmware, WL500gp-1.9.2.7-10-USB-1.71.trx, on my WL-500GP.
There is a function named "USB connection."
After I changed the firmware to "WL500gp-1.9.2.7-d-r381.trx," there is no
"USB…
-
```
This patch expands the existing USSD support, moving USSD operations off of
the Service class and into their own set of objects. We did this work in
support of a custom development project to mak…
-
```
Dear, I have an interface with multiple modems. The messages are not sending
the same are in Started Status continuously. However during shipments
constantly mondems enter a state other Status (…
-
```
I use Koppel's firmware, WL500gp-1.9.2.7-10-USB-1.71.trx, on my WL-500GP.
There is a function named "USB connection."
After I changed the firmware to "WL500gp-1.9.2.7-d-r381.trx," there is no
"USB…
-
```
Dear Sir,
When I tried to run the following code comes with smslib.net as a example
program this error occurred. the exact location the exception raised is pointed
with a comment (look at line:…
-
```
Hello, I'm using SMSLib to get recived sms from a phone or a device to the pc,
but that is not my problem...
Does anyone know if there is any problem with the bluetooth connection?
I have an Huaw…
-
```
What steps will reproduce the problem?
1. Send an SMS to the E220 that contains international characters (å,ä,ö)
2. Reading the SMS from the device using sms_read() returns the SMS
without the in…
-
Hi,
why the device changes the port ?
if i do gammu-detect, my device = _/dev/ttyUSB0_ but, in 5 min, my device = _/dev/ttyUSB1_...
thx for your help.
my conf :
```
[gammu]
# Gammu library config…
-
```
Hello,
I am using a Huawei E220 modem. Its parameters of gateway creation curiously
works even with other hardware manufacturer modems (I already tried LG Phone,
ONDA and D-Link models).
Anywa…
-
```
Hi people.
I'm pursuing to find an answer for my problem since two months ago. When I try
to run the example ReadMessage.java, I get the message:
org.smslib.GatewayException: GSM Network Auto-…