-
Hi @marvinroger,
will homie-esp8266 v2 be in a way compatible so we can upgrade from v1.5.0 via OTA?
Thanks & regards,
Jan
-
Hi,
Great work! I'm a noobie and really appreicate your work. Having a little problem.
I'm trying to compile the 03-hx711-scale-esp-12.ino in the arduino ide 1.6.9. I'm getting the following erro…
-
I'm using homie 2.0.0.
I have a RPi with mosquitto installed.
On the pi I also installed homie-ota.
When I push an firmware update, I see the firmware binary on the MQTT queue "homie/devicename/$impl…
-
I'm working on an IR Node but I need to know the last state. I was thinking about just saving them on the ESP (EEPROM/SPIFFS) but then I thought perhaps it would make more sense to load the retained v…
-
just wondering if version 2 is live yet ?
reason for asking there are a few components that only work for version 2 only now and the online doco is version 2 now
TA
Leeb
-
I have set up a node with two properties. Pertinent code looks like:
```
HomieNode onboardNode("atmospheric", "temperature,humidity");
void setup()
{
onboardNode.advertise("temperature");
onboa…
-
For Homie projects using SPIFFS, it would be beneficial to also allow for updating the filesystem remotely.
esp8266/Arduino Updater provides support for SPIFFS updates. We just need a Homie conventio…
ghost updated
7 years ago
-
Hi,
I think there is a little error in the LightOnOff sketch example.
`digitalWrite(PIN_RELAY, on ? HIGH : LOW);
`
should be
`digitalWrite(PIN_RELAY, on ? LOW : HIGH);
`
Thanks again for the great jo…
-
Hi,
When using v1.5.0 via PlatformIO, the UI fails to proceed beyond the MQTT tab.
The serial output only outputs the following...
✔ Wi-Fi scan completed
Received heart request
Received device inf…
-
Hi,
First of all, apologies for open an issue for this question, it's a question, not an issue.
I'd realised D3 and D4 pins are always HIGH and I don't know why. I want use this two pins as outputs t…