-
I noticed the following behavior in the laster master for Icom backends (tested on IC-7300 and IC-7600):
* `\set_mode` (or `M`) with PKTUSB and PKTLSB modes will result into regular USB and LSB mod…
-
Running kappanhang commit a998382
Raspberry pi 4
Go installed from binaries and resides in /usr/local/go/bin
go version go1.15.6 linux/arm
Connecting to a ICOM-705 on 192.168.88.186
./go/bin/kapp…
-
I've developed a custom network-based rotator backend for use at our local club house. The controller is Arduino Due based and the code is open-source, available in GitHub: https://github.com/mikaelno…
-
I need the ability to operate in split VFO mode to support WSJTX using HackRF device.
WSJTX test the ability to do split operation at initilization and it this capability is not available it fails.
…
N5BRG updated
3 years ago
-
I have one of the most popular ham radio rigs at the current time: an ICOM IC-7300. Many other hams also own this radio.
UHRR is able to turn off this radio, but is unable to turn it back on with t…
-
```
rigctl, Hamlib 3.3
Report bugs to
rig_init called
dummy: _init called
rig_register called
rig_register: rig_register (1)
rig_register called
rig_register: rig_register (2)
rig_register…
-
I've been playing with hamlib/rigctl's functions for turning my FT-891 on/off from the command line. This feature only works with some radios, so it wouldn't be for every user. But the ability to tu…
-
I am running UHRR on a RPi3 to connect a Kenwood TS-2000.
Unfortunately it is not working as expected.
One of possible root cause seems to be the incorrect serial speed.
With te command `rigctl …
-
Running WJST V2.2.2 I get this error when trying to connect to an FT-897. Switching the rig type to FT-857 results in a successful connection. CAT control also works as expected in other application…
-
Hello, when trying to use both FreeDV and Flrig together, I get a Hamlib PTT error: communication bus collision.
I am using Linux Mint 20 and a FT-991 .
Relevant links:
https://github.com/drowe67…