-
I created a VirtualDomain RA configuration, but failed to put the libvirt xml for the guest vm in place.
When the RA was started, it failed to start with rc=5 (not installed) as expected, and tried t…
-
Steps to reproduce:
Step 1: Kill mysql processes of Master.
Step 2: Wait until Heartbeat/Pacemaker switched Master/Slave.
Step 3: Repeat step 1 and step 2 two times.
Step 4: Observe Master/Slave statu…
-
Hi Guys,
i tried a Setup with Pacemaker, KVM, DRBD
DRBD as Master/Slave Ressource inside Pacemaker works well, see Config attached.
If you get the KVM Network to work, i always ran in this kind of…
-
Using this for puppetlabs-nova testing I am getting very inconsistent results. On the compute I get only a portion of the conf fille on one run, then next run chops half content out. this goes back an…
-
Hi,
I used your RA on Ubuntu 12.04, Pacemaker 1.1.6, Postgres 9.2.
I edited paths as follow:
```
primitive pgsql ocf:heartbeat:pgsql \
params \
pgctl="/usr/lib/postgresql/9.2/bin/pg_ct…
-
configure: 2 machine,ip:192.168.4.104 and 192.168.4.105,host name: h105 and h104,
master postgres on h105.
my configuer of pacemaker :
node $id="01211558-f31b-445a-8a97-615bf30fec35" h104 \
…
-
Hello
I'm having a problem getting conntrackd ms to work with a colocation constraint. I need to have Master conntrackd only on the node that has the "lip" IPaddr2 primitive running on it.
Here are …
-
when i connect to pacemaker-drbd-iscsi cluster using lcmc ver 1.3.9 in message log on all nodes there are such errors every 10 seconds
May 11 22:02:21 kvm02 kernel: [32855.935590] virsh[8883]: segfa…
Vadq updated
12 years ago