-
### Description
I would like to see Marlin integrate with CNC controllers. Universal GCode Sender for example. To make this possible, these 3 commands would be a minimum.
Add immediate commands …
-
Hello,
it is more a question than an issue. I am wondering if it is possible to use the TMC5160 SilentStepStick in spi mode. So that there is no need for the step and dir connection. As far as I unde…
-
Hi, I'd like to define my own set of custom pins for spi if possible (for use with TMC5160). Having scoured the source I have only found reference to the CS pin and spi_index which is presumably 0, th…
-
Marlin will not boot after updating firmware with MAX31865 for a PT100 on Extruder 0.
Board: BTT SKR Pro V1.1
Drivers: TMC5160 on X,Y,Z,E0
I²C EEPROM module
Extruder Temperature by PT100 RTD
…
-
### Bug Description
Printer: Custom 455,457,400 area/dual x carriage config.
Board: SKR Pro V1.1
Stepper:
DRV8825 x0,x1,z,e0,e1
TMC5160 y
Marlin Version: bugfix 2.0
error message: (…
-
### Bug Description
When using 4 x TMC2209 and 1 x TMC5160 and want to use sensorless homing on both driver types. If SPI_ENDSTOPS is define in the advanced config an error will be thrown durin…
-
Any photos or description of how you mounted the motor to your lead screw and what motor / driver you are using?
I have the same lathe, and have enough spare steppers/servos, ESP boards to build th…
-
### Bug Description
With actual bugfix version i have no homing capability of the y-axis.
(Tried older firmware without changing/modifying cable connections and it works)
### My Configurations
…
G4Cab updated
4 years ago
-
i don't think this is a compiling error because it seems that i haven't gotten around to that..
I feel a little confused about compiling the firmware. i have followed the instructions for setting …
-
[Input shaping](https://en.wikipedia.org/wiki/Input_shaping) is a control technique to create a commanding signal that cancels its own vibrations. It would be great to support it in Klipper.
The co…