-
# Bug report
llvm_nvme_fuzz test with nvme_tcp_qpair_connect_sock: *ERROR*: sock connection error of t qpair=0x7fc3af3a1a10 with addr=127.0.0.1, port=4420
## Expected Behavior
## Current Behavi…
-
Just come across these new modules from eByte which don't use a standard CC2592 amplifier but a new one which is built-in (accordin to the datasheet) and wonders if someone knows if they can be flashe…
-
While running my app in debug mode, it crashes radomly and logs this or something similar:
```
F/libc (11163): Fatal signal 11 (SIGSEGV), code 128, fault addr 0x0 in tid 11398 (Thread-5), pid 1…
-
Hello Lyusupov,
First of all, let me say thank you for all the hard work you've made. I want to ask you a few questions (sorry for open an `issue` but I couldn't find another way to send you a mess…
-
Hi!
I have a question, have you been testing your library with E22 modules?
I think there might be an issue because they have different command formats and responds.
As well as for E22 programming …
-
I have been using your great library for testing range of Ebyte E22 modules and it works perfectly.
I have following sketch which send sine wave data over ESPNow wireless link and playing it on oth…
-
@NilsBohr OK to request or suggest that Elelabs release an EmberZNet 6.8 NCP application firmware as an optional download?
Silicon Labs EmberZNet SDK version 6.8.x / 6.8.x.x was released this summe…
Hedda updated
2 years ago
-
I could see different AES ciphertext output between NodeJS and Arduino Lib as below. Hence, I could not decrypt in NodeJS from Arduino Uno sent via Serial port. Also, noted that Arduino Uno output is …
-
ESP32-C3 is a cost-effective, RISC-V-based MCU with Wi-Fi and Bluetooth 5 (LE) connectivity for secure IoT applications. The ESP32-C3 is a chip recently released by Espressif
When I run the follow…
lybgo updated
2 years ago
-
Hey! I start work with new for me module e104-BT5032A. I use ebyte_e104_bt5032a_bootloader-0.6.0 bootloader and change variant.h in package. All works fine but i can`t start work with BLE. I have the …