-
### Bug Description ###
M907 S0 doesn't reduce the motor current to 0
### My Configurations ###
Example Configs for Flashforge https://github.com/MarlinFirmware/Configurations/tree/import-2.0.x/c…
-
**Cura 4.8**
**WINDOWS10**
**FLASHFORGE CREATOR PRO**
**Actual results**
**1st problem** :
Extruder temperature in cura: 240 ° C
Extruder real temperature in the 3D printer : 200°
**2nd pr…
-
**Describe the bug**
Small part taking 45.5 hours and using 13.8km filament
**Environment**
Windows 10, Slic3r 1.3.0, GpxUi v2.5.2
**To Reproduce**
Slicing included stl using the Right …
-
I'm printing on a dual extrusion machine (Flashforge Creator Pro) and using the left extruder which is labelled as Tool 1 (the right extruder is Tool 0). The estimates for filament usage and height du…
-
Start GCODE waits for bed then starts heating extruder. Why not do both simulateously? Line 14-17
M140 S{material_bed_temperature, initial_extruder_nr} T0 ; set bed temperature
M134 T0 ; stabilize…
-
Hi! I'm using a regular USB cable (USB-A to USB-A) to connect from my Raspberry Pi with OctoPi/print to my Flashforge Finder (it's less than a year old, so I'm not sure how to tell if it is a v1 or v2…
-
Hello,
Thank you so much for this free software !
I changed the nose of my printer (old is 0.4mm, new is 0.2mm)
So, in Cura, I created a new printer (based on Wanhao Duplicator i3 Plus)
In p…
-
just get a Flashforge Creator Pro and liked to use Cura 3.1.0.
setting up the printer in Cura (incl. start&end-code) was done - thx to the www - and looks ok.
but printing from SD-Card is impossible…
ghost updated
4 years ago
-
Updated to the latest and now I can't upload to SDCard.
Tried from Cura as well as direct in the Octoprint interface.
Flashforge Finder V2
[octoprint (3).log](https://github.com/Mrnt/OctoPrin…
-
I'm using Octoprint 1.3.6, FlashForge Creator Pro, and the most recently distributed version of OctoPrint-GPX. Prior to updating GPX everything was working as expected. After I updated I see odd behav…