-
Hello, I'm using an ESP8266 NodeMCU with two connected PZEM-004t with a custom firmware I wrote by myself. I would like to use Tasmota and I would like to know if it would be possible to configure two…
-
Sdm120
Does not send the correct power value to domoticz
It should send the value x1000 and it does not send
-
### BUG DESCRIPTION
Hello,
i use an Sonoff Pow R2 flashed with tasmota, to measure the energy production of my little photovoltaic system. My problem is that the va…
-
Hi,
I'm using espsoftwareserial to communicate with a PZEM-004T using library [https://github.com/olehs/PZEM004T](url).
I got a lot of reading errors and mostly an exceptions occured after a few s…
-
When the PZEM-004 sensor is connected, the module repeatedly reboots (exeption, watchdog).
Module operation time from several seconds to several hours. After that - a new reboot cycle.
The numbe…
-
**Home Assistant release with the issue:**
Home Assistant 0.96.4
**Last working Home Assistant release (if known):**
Unknown
**Operating environment (Hass.io/Docker/Windows/etc.):**
H…
-
### BUG DESCRIPTION
Dear All,
I have flashed one new Shelly 2.5 device with self compiled software version 6.5.0.14 and Shelly 2.5 buttons template.
The device is attached on a HomeAssistan…
-
Dear olehs great job indeed! Tried to adapt code PZEM004TDIsplay to Black Pill board equipped with an STM32F103C8 chip. It seems code (without compiler errors) got on stuck once library is invoked. ST…
-
**As can be seen in the attached log, there is a random drop of power values. Strange is, that both the current and voltage values are not equal to zero. There must be a calculation or sampling error …
-
i need a little help with display values from a connected pzem004 energy monitor... compiled binary to have both display and pzem working, no problems here...
in console i get a line as such, every…