-
### Describe the bug
I recently added a USB network adapter to my Raspberry Pi because the built-in network card, which lacks an external antenna, had poor signal reception. After doing this, my USB …
-
Flashed monetery succeessfully by using your EFI and also booted successfully but after patching OCLP, its stuck at error permanently which I mentioned below.
plz help
my configuration is
Model …
-
[https://www.seagate.com/files/www-content/support-content/internal-products/barracuda/barracuda-ssd/_shared/masters/product-manual-barracuda-ssd-100835666a.pdf](url)
`sudo ./smartctl -x /dev/sda >…
-
- [x] Алёна
- [ ] Дмитрий
- [ ] Алексей
- [ ] Сергей
-
### The problem
I tried to install a fresh instance of raspi os (on raspi4 with ssd) with HA using raspi imager...then the backup during onboarding...but no chance. Then I took an HA image, flashed…
-
Ive installed PINN using SSD without sd card, but when i try to boot Arch2 Os i get this error.
> Not a valid Partition: PARTUUID=55463d29-0a
but the boot partion is the above, Raspbian boots f…
-
When initializing the RefCOCOg dataset, there was a bug. Can you provide more details about the/ssd/myc/VLsproject/VLTVG/split/data/gref/gref_train.pth file?
-
I would like some way to install this on a HDD/SSD on a PC, preferably with a graphical insaller programme on the live image.
-
SteamDepotDownloaderGUI-Windows-v2.4.2 download button doesn't do anything, except create the "depotdownloader-2.5.0.zip" folder everytime the button is pressed. Command prompt does not open, Steam wa…
-
Hi Folks,
I have run into a problem when trying to convert a large IQ recording into a SigMF archive.
The problem starts when I call the `archive()` method. When the `sigmf-data` file is very l…