-
### Bug Description
Printer: Custom 455,457,400 area/dual x carriage config.
Board: SKR Pro V1.1
Stepper:
DRV8825 x0,x1,z,e0,e1
TMC5160 y
Marlin Version: bugfix 2.0
error message: (…
-
Description:
On my Prusa I3 clone which I changed from 8bit to 32bit with bigtreetech SKR1.4 with Bigtreetech TMC2209 v1.2 on Marlin 2.0.c from 06.09.2011 senssorless homing is not working . Chang…
-
### Description
Regarding TMC2130 in Configuration_adv.h
#define STEALTHCHOP
I want to setup Stealtchop or Spreadcycle for every axis individually.
I had some problems with losing stepps a…
-
### Bug Description
When using 4 x TMC2209 and 1 x TMC5160 and want to use sensorless homing on both driver types. If SPI_ENDSTOPS is define in the advanced config an error will be thrown durin…
-
Hello everyone,
I’am working on a self-made CoreXY printer:
SKR PRO
24 Volt
TMC5160 v1.2 from BIGTECHTREE (removed the CLK pin)
Nema 17, 0.9’’ 42BYGHM809
TFT 3.5 v.2
Mechanical Endstops
the…
-
Hello,
it is more a question than an issue. I am wondering if it is possible to use the TMC5160 SilentStepStick in spi mode. So that there is no need for the step and dir connection. As far as I unde…
-
Marlin will not boot after updating firmware with MAX31865 for a PT100 on Extruder 0.
Board: BTT SKR Pro V1.1
Drivers: TMC5160 on X,Y,Z,E0
I²C EEPROM module
Extruder Temperature by PT100 RTD
…
-
Any photos or description of how you mounted the motor to your lead screw and what motor / driver you are using?
I have the same lathe, and have enough spare steppers/servos, ESP boards to build th…
-
### Bug Description
With actual bugfix version i have no homing capability of the y-axis.
(Tried older firmware without changing/modifying cable connections and it works)
### My Configurations
…
G4Cab updated
4 years ago
-
First I just wanted to say that this is a fantastic initiative. I am about to purchase.
The spi_daisy_4axis.h file does not exist. Should I just use spi_daisy_4axis_xyz.h?
I notice that the Grbl…