-
There is a need to make a software UART speed converter. Configured GPRS and LORA-868MHz modules with an operating speed of 9600 bit/s are connected to the ESP32 microcontroller. The initial speed of …
-
### Current Situation
Hello,
I bought by accident an UART board with the SX1278 (see link below).
Do you plan to add a UART mode to your code?
https://de.aliexpress.com/item/32791728376.html?a…
-
Good afternoon
Dear Aaron Lee
HelTec Automation
Henry Espinoza greets you, from GYE ECU.
I saw your page and I think you can help me with a student project on the subject of microcontrollers…
-
Es befinden sich Wiederholungen in der Nachricht:
MU;P0=765;P1=-948;P2=8124;P3=-1438;P4=-2781;P5=-18738;D=012103040403040303030404030303030304040304030304030405210304040304030303040403030303030404030…
-
"You can verify whether the LoRa modem is working correctly by transmitting a message at 868.1 MHz. "
For this part, I don't understand why transmitting messages at 868.1MHz since the center carrier …
-
Find appropriate antenna (something to buy or build).
-
I looked for any docs of this fork, but couldn't find any. Maybe I'm totally wrong here.
I was looking for a way to control a 868Mhz radio device. Ideally with tasmota and the CC1101 I have laying ar…
-
Inspired by sites like [Hackaday](https://hackaday.io/project/168227/components) which show the (usually, hardware) components that go into realising a project, it would be nice to have structured inf…
-
Extracted from the closed issue where I had issues compiling (now resolved using esphome command line).
I am getting boot loops still and have tried 2x ESP32s and CC1101 modules and followed the wi…
-
Hi there! Hoping you could give me advice. I have nrc7292 modules, both alfa and silex. I have them both working great with US frequencies. I am wondering where you source nrc7292_cspi.bin firmware fi…