-
Hello,
(can you read my fift post?)
I actually have a problem and I have pain to debug or to find the start point to debug it.
I am collecting data sensor and I sent it each hour. It works fine. …
-
RipVW updated
5 years ago
-
Basically the same problem as this when running hello_LoRa.ino
https://github.com/adafruit/TinyLoRa/issues/23
I'm using RFM95 on a M0 arduino (however non adafruit), and I know it worked twice (c…
-
I'm trying to add YMODEM receive to my project using [this library](https://github.com/embedded-creations/XYmodem) (my fork which allows for setting the Stream port instead of using hardcoded Serial).…
-
### CircuitPython version
```python
Adafruit CircuitPython version 9.4.0
```
### Code/REPL
```python
===========================================================================
# SPDX-FileCopyrig…
-
Hello,
With your STM32F405 Feather Express card, the PB12 pin (cardDetect) is always to 0 (GND).
This is due to a short circuit with the card reader double pin 10
![cardReader_STM32F405-Feather-E…
-
Just checking on mA consumed during sleep -
for the current 'develop' branch using logging_to_EnviroDIY.ino, on sleep the current reduces to about 3.5mA after EnviroDIYLogger.systemSleep() is execut…
-
### CircuitPython version
```python
Adafruit CircuitPython 7.2.0 on 2022-17-4; Raspberry Pi Pico with rp2040
```
### Code/REPL
```python
import time
import board, busio, digitalio
impo…
-
You need to have the external DS3231 featherwing attached in addition to the Adalogger M0 with SD on it to get the functions to work!
If the Hypnos library for Adalogger Requires Both the Adalogger A…
-
hi
first: thank you for this library =)
I tested it today and found that the wire speed has a great influence on microcontroller performance.
One factor is the time needed to transmit the data,…