-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists, even with the latest bugfix 2.1x code.
### Bug Description
Compiled and installed latest (5/27/2022) bugfix…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Todays bug fix (June 2, 2022) compiles fine with the provided configurations. When booting th…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Bug in Thermal Runaway. When it happens, the usual beeps. But no message on LCD. So you can't…
-
### Description of the bug
Hello,
When slicing a model with a rounded corner upwards, the infill is not continued until its passed that corner. Creating a weak spot at a vulnerable spot (it snaps …
-
### Application Version
4.13.1
### Platform
Windows 10
### Printer
Anycubic Predator Delta
### Reproduction steps
Slice any file which requires the Filter Out Tiny Gaps option
Also using Fill …
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
2.0.9.2 will not settle on a hot end temp. PID settings does not fix the issue.
### …
-
Its a serial device.
PB11 is USART3_RX, PB10 USART3_TX is on that connector
In Marlin all you do is enable the uart
#define SERIAL_PORT_2 3 and set the baud rate, #define BAUDRATE_2 115200
This d…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
After successfully compiling and installing the lates bugfix, the PID tuning menus are missin…
-
Is this chipset supported - I saw in the "make" menu STM32F1 ... would I be able to use Klipper with this printer. While I don't understand ARM CPU (registers etc) details, I am getting quite comf…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Under .vscode>c_cpp_properties.json I get the below error that prevents me from compiling the…