-
### Link
https://www.aqara.com/smart-wall-switch-H1-with-neutral_spec
### Database entry
{"id":2,"type":"Router","ieeeAddr":"0x04cf8cdf3c848a45","nwkAddr":14970,"manufId":4447,"manufName":"LUMI","p…
-
### Link
https://aqara.com/en/product/smart-wall-switch-z1-pro-sea/
### Database entry
```json
{
"id": 38,
"type": "EndDevice",
"ieeeAddr": "0x54ef441000b05060",
"nwkAddr": 45653,
…
-
### What happened?
My kids played with one wall switches - it was showing "red" leds ... 😡 it was removed from Z2M. (probably they pressed more than 6 seconds)
Device: [WS-EUK04](https://www.zigb…
-
### The problem
A new HA installation on Docker (2024.1.6) with a ConBee II coordinator.
All other Zigbee devices are working correctly. Only the Aqara H1 Wireless Remote Switch (Double Rocker) t…
-
### The problem
ZHA just stopped working. Noticed because lights one by one went offline. Stuggling even to identify correct error message.
After reload could not bring it back. Restoring backups…
-
### What happened?
I've just installed one of these, and I can control my lights via the buttons and via Home Assistant using the Z2M integration. However, physical button presses do not seem to re…
-
### What happened?
My IKEA devices are leaving the network shortly after pairing, the devices are supported:
https://www.zigbee2mqtt.io/devices/E2001_E2002.html - have 2 buttons, one has the probl…
-
### Issue Guidelines
Before opening a new issue, please review the following:
* The Github Issues is for Domoticz CODE Bugs only. Please do not use this for general questions, howto, or this is no…
-
### Link
https://www.aqara.com/en/product/smart-wall-switch-z1-pro-sea/
### Database entry
{"id":5,"type":"EndDevice","ieeeAddr":"0x54ef441000b2640e","nwkAddr":38880,"manufId":4447,"manufName…
-
### The problem
As a title says after update (i tried twice) one of Aqara switches changes itself as light. It is Aqara Smart Wall Switch H1 EU (With Neutral, Double Rocker) detected as lumi.switch.n…